Skip to content

Professional line with 25 mm plate

PRO heavy duty welding table with 25 mm plasma nitrided top

The PRO welding table has a 25 mm welding table top in S355J2+N, plasma nitrided and surface ground, with a surface hardness of approx. 850 HV. The manufacturer, die schmiede, recommends this heavy duty welding table for high demands on precision and load capacity.

Request a quoteView PRO sizes in the online shop (German)

PRO welding table 2400 x 1200 mm, plasma nitrided, with a grid of holes on the plate and side walls in a bright workshop

In short: The PRO welding table from die schmiede has a 25 mm plasma nitrided, surface ground top in S355J2+N with 28 mm bores in a 100 x 100 mm grid. Nine sizes run from 1000 x 1000 to 3000 x 1500 mm, seven also with diagonal holes. Recommended total load: up to 4,000 kg on 4 feet.

PRO heavy duty welding table: technical data

All PRO tables have the same plate design. They differ only in size, weight and the number of foot pads.

Technical data of the PRO welding table 25 mm
FeatureValue
Plate thickness25 mm
MaterialS355J2+N
Surfaceplasma nitrided, surface ground
Surface hardnessapprox. 850 HV (Vickers)
Bores28 mm diameter, 3 mm countersink
Grid on the table top100 x 100 mm
Side walls200 mm high, bore spacing 50 mm
Corners and edgesmilled 3 to 6 mm
Substructurereinforced with 140 x 15 mm flat bar
Legs80 x 80 x 6 mm structural hollow section, height-adjustable
Working heightapprox. 865 to 965 mm
Foot pads110 mm diameter, RAL 9005 jet black
Recommended total loadmax. 4,000 kg on 4 feet with evenly distributed load

The countersunk bores make it easier to insert bolts and accessories. In the side walls the bores are 50 mm apart, half the spacing on the table top, which gives you more positions when clamping from the side. What plasma nitriding changes on the surface is explained in the guide plasma nitriding explained.

All sizes of the PRO welding table

The shop offers the PRO table in nine sizes with a working area between 0.96 and 4.50 m². Weights range from approx. 430 kg to approx. 1,520 kg.

Sizes of the PRO welding table 25 mm in the shop, weight according to shop data, as of November 2026
Size in mmWorking areaWeight approx.Foot padsAlso with diagonal holes
1000 x 10001.00 m²452 kg4yes
1200 x 8000.96 m²432 kg4yes
1200 x 12001.44 m²580 kg4yes
1500 x 10001.50 m²608 kg4yes
1500 x 15002.25 m²801 kg4no
2000 x 10002.00 m²736 kg4yes
2000 x 12002.40 m²794 kg4no
2400 x 12002.88 m²986 kg4yes
3000 x 15004.50 m²1,517 kg6yes

According to the shop, some of the versions with diagonal holes weigh less, for example approx. 1,425 kg in 3000 x 1500 mm. The product page in the shop is authoritative. The octagonal table measuring 1000 x 1000 x 200 mm, larger tables and custom dimensions are covered under large and custom sizes.

Diagonal holes: more clamping positions

The PRO version with diagonal holes has a diagonal hole pattern in addition to the 100 x 100 mm grid.

According to the manufacturer, it allows even more flexible clamping and in certain cases saves stops and clamps. Plate thickness, material, hardness and equipment are identical to the standard PRO version.

The version with diagonal holes is available in seven sizes: 1000 x 1000, 1200 x 800, 1200 x 1200, 1500 x 1000, 2000 x 1000, 2400 x 1200 and 3000 x 1500 mm. It makes sense if you build many fixtures with changing clamping positions.

Close-up of a PRO welding table top with diagonally offset 28 mm bores and engraved grid lines
PRO table top with diagonal holes.

Who the PRO table is for

The manufacturer recommends the PRO table for high demands on precision and for a particularly hard surface.

  • metal and steel fabricators with heavy assemblies, where a stated total load matters
  • fixture building and small batches, where parts sit in the same position again and again
  • set-ups with many clamping tools at the same time, including on the side walls
  • workshops that want to extend or couple their tables later with U-angles PRO
  • robot cells, for which the octagonal table is available in PRO design

When the 15 mm plate is enough is explained on the page Standard welding table 15 mm. The trade-offs in detail are covered in the buying guide.

Starter set, accessories and extensions

The shop offers most PRO sizes including a starter set, and there are accessories in a dedicated PRO version for the 25 mm plate.

Choose quick-release clamping bolts and accessory sets in the version for 25 mm plate thickness. The accessory sets 1.0 to 4.0 contain 24 to 53 parts. Several PRO sizes are also offered in the shop as a special offer together with accessory set 2.0 or 3.0.

For extending the table, for vertical set-ups and for connecting tables, the U-angles PRO (Winkel U-Form PRO) fit, with 25 mm material thickness in S355J2+N, plasma nitrided and surface ground. Lengths and matching parts are listed under extensions and construction bridges.

U-angle PRO measuring 1500 x 200 x 200 mm, plasma nitrided, with bores on all sides
U-angle PRO for extending and coupling tables.

Request a quote for a PRO welding table

Send the size, the version with or without diagonal holes, the accessories you need and your delivery country, and die schmiede will prepare a quote. All PRO sizes with current prices are listed in the online shop, which is in German and delivers within Germany only.

Request a quote PRO tables in the online shop

Frequently asked questions

How thick is the top of the PRO welding table?

The table top of the PRO welding table is 25 mm thick. It is made of S355J2+N, plasma nitrided and surface ground, and according to the manufacturer has a surface hardness of approx. 850 HV. The side walls are 200 mm high and also drilled. For comparison, the Standard line has a 15 mm plate in S355MC.

How much does a PRO welding table weigh?

A PRO welding table weighs approx. 430 to 1,520 kg, depending on size. According to the shop, the table measuring 1200 x 800 mm weighs approx. 432 kg, the one measuring 2000 x 1000 mm approx. 736 kg and the one measuring 3000 x 1500 mm approx. 1,517 kg. The weights of all sizes are in the table on this page.

How much load can a PRO welding table carry?

For the PRO welding table, die schmiede recommends a total load of no more than 4,000 kg, on four feet and with the load evenly distributed. The shop gives no figure for the Standard line. If you plan very heavy or concentrated point loads, clarify this with die schmiede in advance.

What are diagonal holes on the PRO table?

With diagonal holes, the plate has a diagonal hole pattern in addition to the 100 x 100 mm grid. According to the manufacturer, parts can be clamped more flexibly this way, and sometimes you need fewer stops and clamps. The version is available in seven PRO sizes from 1000 x 1000 to 3000 x 1500 mm, with the same plate and the same material.

Can I clamp on the sides of the PRO table?

Yes. The side walls of the PRO table are 200 mm high and have 28 mm bores at 50 mm spacing. Stops, clamping squares and U-angles PRO can be fixed there to extend the working area or to build vertically. The side wall therefore works as a second clamping surface.

What our customers say

5.012 reviews on Google

All reviews on Google (opens in a new tab)

Reviews are shown in their original language (German). This is a selection of the most recent Google reviews with 4 or 5 stars and a written comment (up to 12). Reviews have not been checked for authenticity.