Skip to content

Accessories: aligning

Welding table squares, angle stops and universal stops

Welding table squares and stops set the reference edges on the table: universal stops in the plane, angle stops and clamping squares in height. die schmiede offers them from 150 to 525 mm long and up to 800 mm high, fixed in the 28 mm holes of the hole grid.

Request a quoteView stops in the online shop (German)

Angle stop and clamping square 500 L PRO, nitrided, with holes and a slot on the grid of holes of a welding table

In short: Universal stops (150 to 525 mm long) limit the workpiece in the plane, angle stops and clamping squares (75 to 800 mm high) give a reference edge in height, and universal flat angles position large parts. Everything is fixed in the 28 mm holes; slot and millimetre scale allow dimensions between two grid holes.

Welding table squares and stops: four designs

Which stop is right depends on whether you want to align in the plane, build upwards or position large parts.

Stops and squares for welding tables with a 28 mm hole grid compared
DesignTaskSizesFixing
Universal stopStop in the plane, on the table top and on the side walls150 to 525 mm long, mostly 50 mm wideQuick-release clamping bolt through slot or system hole
Angle stop and clamping squareVertical reference edge, stop for large parts, table extension75 to 800 mm highQuick-release clamping bolts, PRO squares with countersunk clamping bolts
Universal flat angleStop and positioning work on larger components175 x 50 to 500 x 375 mmSystem holes and slot
Eccentric stopPoint stop, adjusted by turningØ 100 mmOne system hole

All parts are nitrided. The quick-release clamping bolts that hold stops and squares on the table are covered on the page clamps and clamping bolts.

Universal stops: slot or fixed system holes

Universal stops are nitrided flat bars, mostly 50 mm wide and 25 mm thick, which according to the shop are used in the holes on the table top and in the side holes of the side walls.

The type of adjustment is what matters. Versions with a slot (suffix L) can be moved steplessly, by up to 100, 200 or 220 mm depending on the model. Because the grid holes are 100 mm apart, this lets you reach any intermediate dimension. According to the product titles, the L versions carry a millimetre scale.

Models 150 and 250 without a slot have 3 and 5 system holes respectively, spaced 50 mm apart. They can therefore be moved in fixed 50 mm steps.

Universal stop with slot and millimetre scale on the hole grid
Universal stop with slot for intermediate dimensions in the 100 mm grid
Universal stops from die schmiede (dimensions and weights from the shop)
ModelLength x width x thicknessAdjustmentWeightArt. no.
Universal stop 150 L150 x 50 x 25 mmSlot 0 to 100 mm0.78 kg28-3-0002
Universal stop 150150 x 50 x 25 mm3 system holes, 50 mm apart1.1 kg28-3-00015
Universal stop 225 L225 x 50 x 25 mmSlot 0 to 100 mm and system hole1.4 kg28-3-0003
Universal stop 250250 x 50 x 25 mm5 system holes, 50 mm apart1.8 kg28-3-00011
Universal stop 250 L250 x 50 x 25 mmSlot 0 to 200 mm1.2 kg28-3-0004
Universal stop 325 L325 x 50 x 25 mmSlot 0 to 220 mm1.82 kg28-3-0006
Universal stop 325 L with 3 system holes325 x 50 x 25 mmSlot and 3 system holes2.1 kg28-3-00010
Universal stop 525 L525 x 50 x 25 mmSlot 0 to 100 mm and 7 system holes3.5 kg28-3-0007
Universal stop 500 S500 x 100 x 25 mmSlot 0 to 200 mm and 5 holes7.9 kg28-3-00012 (not available as of 19 November 2026)

If you need several identical stops: the 150 L and the 225 L are also available as a set of 10 in the special offers.

Angle stops and clamping squares: Standard, PRO and GK

The clamping squares from die schmiede form three groups that differ in material, size and fixing.

Standard squares with millimetre scale

Squares 75 SL, 175 L, 200 L and 275 L are 50 mm wide, 25 mm thick, nitrided and, according to the product titles, fitted with a millimetre scale. The combination of system holes and slot makes them versatile: as an adjustable square, as a stop for large or tall parts and, in the case of the 275 L, as a table extension. The 200 L also has a head plate for further combinations.

PRO squares cast from GGG40

The PRO squares 300 L, 500 L, 750 L and 750 R are cast from GGG40 and measure 75 mm wide, 200 mm high and 27 mm thick. They are suitable as a stop for large parts or as an extension of the welding table. To fix each square you also need 2 countersunk clamping bolts (art. no. 28-4-0009-25), which are designed for PRO welding tables with a 25 mm top.

GK squares up to 800 mm high

For tall set-ups there are the PRO squares 300 GK, 600 GK and 800 GK, each in a left-hand and a right-hand version. They are 95 mm wide, 27 mm thick and also cast from GGG40. The shop recommends ordering them in pairs; each square is fixed with 2 flush clamping bolts.

Angle stops and clamping squares (dimensions, material and weight from the shop)
SquareLength x height x width x thicknessVersionWeightArt. no.
75 SL175 x 75 x 50 x 25 mmNitrided, millimetre scale1.4 kg28-2-0001
175 L175 x 175 x 50 x 25 mmNitrided, millimetre scale2.4 kg28-2-0002
200 L with head plate175 x 200 x 50 x 25 mmNitrided, millimetre scale2.7 kg28-2-0005
275 L275 x 175 x 50 x 25 mmNitrided, millimetre scale2.8 kg28-2-0004
300 L PRO300 x 200 x 75 x 27 mmCast GGG40, nitrided6.52 kg28-2-0006-25
500 L PRO500 x 200 x 75 x 27 mmCast GGG40, nitrided9.4 kg28-2-0007-25
750 L PRO and 750 R PRO750 x 200 x 75 x 27 mmCast GGG40, nitrided13.6 kg28-2-0008-25, 28-2-0010-25
300 GK PRO left and right280 x 300 x 95 x 27 mmCast GGG40, nitrided12.9 kg28-2-0009-25, 28-2-00010-25
600 GK PRO left and right376 x 600 x 95 x 27 mmCast GGG40, nitrided22.5 kg28-2-00011-25, 28-2-00012-25
800 GK PRO left and right376 x 800 x 95 x 27 mmCast GGG40, nitrided27 kg28-2-00013-25, 28-2-00014-25

Square 175 is also included in accessory sets 2.0 to 4.0, square 275 in the starter set and in sets 3.0 and 4.0, and the 75 L in set 4.0. For extensions beyond 750 mm, construction bridges and extension arms from the extensions range are the right choice.

Universal flat angles and eccentric stop

Universal flat angles are flat, nitrided plates 25 mm thick for stop and positioning work on larger components.

With system holes and a slot with 0 to 100 mm of travel, they can be set in fixed positions or variably. The shop lists three sizes: 175 L at 175 x 50 mm (1.85 kg, art. no. 28-3-0008), 275 L at 275 x 175 mm (3.8 kg, 28-3-00014) and 500 L at 500 x 375 mm (12 kg, 28-3-00013).

The eccentric stop 100 is a nitrided disc with 100 mm diameter, 25 mm thickness and a 28 mm system hole (1.4 kg, art. no. 28-4-0002). According to the shop, turning it fixes the adjacent component quickly, steplessly and in a space-saving way.

Universal flat angle in nitrided steel with slot
Universal flat angle for positioning larger components

How to align a component with stops

  1. Define the reference edge

    Determine the decisive edge of the component and place the first stop along a row of holes. The visible grid shows squareness at a glance.

  2. Fix the stop

    Insert a quick-release clamping bolt through the slot or system hole into the table top and tighten it.

  3. Set the intermediate dimension

    If the dimension lies between two holes, slide the stop in the slot and read the value on the millimetre scale.

  4. Set the second axis

    A second stop or a clamping square at a right angle forms the corner against which the component is placed.

  5. Clamp the workpiece

    Press the component against the table and the stop with screw clamps, and only then tack it.

Stops and squares: quote or online shop

Send the stops and squares you need and die schmiede will prepare a quote. The online shop lists every item with its current price and availability; it is in German and delivers within Germany only.

Request a quote Stops in the shop (German)

Frequently asked questions

What is the difference between a universal stop and a clamping square?

A universal stop is a flat bar that limits the workpiece in the table plane, on the top or on the side wall. An angle stop and clamping square also has a vertical leg and therefore sets a reference edge in height; larger squares also serve as table extensions. For flat frames, universal stops are often enough, and for three-dimensional assemblies you add clamping squares.

What are the PRO clamping squares cast from GGG40 intended for?

The PRO squares 300 L to 750 L and R are intended for large parts: at 75 mm wide, 200 mm high and 27 mm thick, they are considerably sturdier than the Standard squares, which are 50 mm wide. According to the shop, they work as a stop for large parts or as an extension of the welding table. Each is fixed with 2 countersunk clamping bolts designed for PRO tables with a 25 mm top.

Should GK clamping squares be bought in pairs?

Yes, the shop recommends ordering the GK squares 300, 600 and 800 in pairs. Each size comes in a left-hand and a right-hand version, so a pair can be set up as mirror images. The GK squares are up to 800 mm high, 95 mm wide and cast from GGG40; each square is fixed with 2 flush clamping bolts.

How far can a universal stop be adjusted?

That depends on the slot: 0 to 100 mm on the 150 L, 225 L and 525 L, 0 to 200 mm on the 250 L and 0 to 220 mm on one version of the 325 L. As the grid holes are 100 mm apart, a 100 mm slot already covers every intermediate dimension. Models 150 and 250 without a slot are moved in steps of 50 mm.

What is an eccentric stop?

An eccentric stop is a round stop disc that sits off-centre in a system hole, so turning it changes the distance to the contact edge. The eccentric stop 100 from die schmiede has a 100 mm diameter, is 25 mm thick and nitrided. According to the shop, it fixes components quickly, steplessly and in a space-saving way simply by turning. It is also included in accessory sets 3.0 and 4.0.

What our customers say

5.012 reviews on Google

All reviews on Google (opens in a new tab)

Reviews are shown in their original language (German). This is a selection of the most recent Google reviews with 4 or 5 stars and a written comment (up to 12). Reviews have not been checked for authenticity.