
PRO welding table 25 mm
The PRO welding table has a 25 mm welding table top in S355J2+N, plasma nitrided and surface ground, …
Large sizes and custom builds
If you need a large welding table, the largest series size from die schmiede is the PRO table measuring 3000 x 1500 mm, weighing around 1.5 t. A larger or custom size welding table, or a special shape, is made to order. Alternatively, you can couple several tables to form one large surface.

In short: The largest series size is the PRO welding table measuring 3000 x 1500 mm, with a 25 mm plate, six feet and approx. 1,517 kg. Larger tables, custom sizes and individual table legs are made to order only. Alternatively, you connect several tables with U-angles to form one large working area.
The table shows the large sizes from die schmiede from 2400 x 1200 mm upwards. The largest series size is the PRO table measuring 3000 x 1500 mm.
| Size in mm | Line | Plate thickness | Weight approx. | Feet | Also with diagonal holes |
|---|---|---|---|---|---|
| 2400 x 1200 | Standard | 15 mm | 635 kg | 4 | no |
| 2400 x 1200 | PRO | 25 mm | 986 kg | 4 | yes |
| 2900 x 1200 | Standard | 15 mm | 730 kg | 4 | no |
| 2900 x 1400 | Standard | 15 mm | 895 kg | 4 | no |
| 3000 x 1500 | PRO | 25 mm | 1,517 kg | 6 | yes |
The 3000 x 1500 mm welding table offers 4.5 m² of working area. It stands on six height-adjustable feet in 80 x 80 x 6 mm structural hollow section, is plasma nitrided and surface ground like every table in the PRO line, and is also available with diagonal holes. According to the shop, the version with diagonal holes weighs approx. 1,425 kg.
Tables larger than 3000 x 1500 mm are not part of the series range. They are only built as custom tables on request, as described in the next section.
If no series size fits, die schmiede builds the welding table to your dimensions on request, larger or smaller than the sizes in the shop.
State length, width, plate thickness, the working height you want, the hole pattern and the heaviest parts that will go on the table.
The team at die schmiede checks the request and prepares an individual quote.
The table is made in Marktsteft, Germany, and delivered by freight forwarder to the kerbside. You need a forklift for unloading. For delivery outside Germany, include the delivery country in your request.
Custom sizes are not ordered in the shop but through a direct request. Use the contact form or call.
Two or more welding tables can be connected to form one large working area: construction bridges in the form of a U-angle are bolted to the side walls for this.
For PRO tables there are U-angles PRO (Winkel U-Form PRO) with 25 mm material thickness in lengths from 500 to 3000 mm. From 1000 mm length the angle needs support from an additional table leg. Short connecting bolts are available to match. The shop also lists nitrided U-angles in S355MC in lengths from 500 to 1600 mm. All parts are described on the page extensions and construction bridges.

How much surface your workpieces really need is explained in the guide welding table size and plate thickness.
The octagonal table (Achtkanttisch) from die schmiede measures 1000 x 1000 x 200 mm and is designed for use on manipulators in robot cells.
The parallel hole pattern covers all nine faces, that is the top and the eight side faces, so you can clamp parts on the sides as well. Plate and side walls correspond to the PRO design: 25 mm S355J2+N, plasma nitrided and surface ground, 28 mm bores in a 100 x 100 mm grid. According to the shop, the table weighs approx. 355 kg.
The octagonal table is listed in the online shop, which is in German and delivers within Germany only. For other countries, request a quote.

Describe the dimensions, plate thickness, application and delivery country, and die schmiede will get back to you with a quote. The large series sizes up to 3000 x 1500 mm are also listed with current prices in the online shop.
From 2400 x 1200 mm upwards there are five large series sizes: Standard with a 15 mm plate in 2400 x 1200, 2900 x 1200 and 2900 x 1400 mm, and PRO with a 25 mm plate in 2400 x 1200 and 3000 x 1500 mm. Both PRO sizes are also available with diagonal holes. Anything larger is a custom build on request.
According to the shop, the PRO welding table measuring 3000 x 1500 mm weighs approx. 1,517 kg, and the version with diagonal holes approx. 1,425 kg. It stands on six height-adjustable feet and is delivered by freight forwarder. You need a forklift for unloading, and for moving the table the shop offers a transport bracket with a load capacity of 2,500 kg.
Yes, die schmiede builds welding tables in custom sizes on request, larger or smaller than the series sizes. State length, width, plate thickness, working height and hole pattern. Custom sizes are not ordered through the shop but through a direct request by phone, email or contact form. You then receive an individual quote.
Yes. According to the shop, die schmiede also supplies tables without legs on request, for example for your own base frame. It also makes individual table legs, for instance for a working height outside approx. 865 to 965 mm. Both are handled through a direct request, not through the shopping basket.
That depends on whether you need a continuous plate. One large table gives you a hole grid without a joint across the entire surface. Coupled tables can be extended later, separated again and moved individually, and the U-angles between them also serve as vertical clamping surfaces. From 1000 mm angle length an additional table leg is required.
An octagonal table is a clamping table with an eight-sided footprint and a hole grid on the top and on all eight side faces. The octagonal table from die schmiede measures 1000 x 1000 x 200 mm, has a 25 mm plasma nitrided plate in S355J2+N and weighs approx. 355 kg. It is designed for manipulators in robot cells.
5.012 reviews on Google
Ich kam mit einem kleinen außergewöhnlichen Anliegen und freue mich über so viel spontane Hilfe, Freundlichkeit und Professionalität, DANKE!
Tanja B.View on Google: review by Tanja B. (opens in a new tab)
Nicht mehr daran geglaubt - aber es gibt sie noch ! Deutsche Wertarbeit !! Rechtzeitig zum Frühlingsanfang konnten wir unsere "Wasserdichte Balkonanlage" mit Außentreppe einweihen und sind vollends begeistert von der…
Hubert L.View on Google: review by Hubert L. (opens in a new tab)
Eine Super-Schmiede, die auch Außergewöhnliche Produkte kreieren kann. Meine Kreuz, die ich zur Entstörung von Elektrosmog wurden auf Millimeter genaue Einstellung geschmiedet. Das war eine Klasseleistung! Jetzt kann ich wieder…
GoggoschelleView on Google: review by Goggoschelle (opens in a new tab)
Unsere verbogene Garagentorstange wurde sehr kurzfristig gerade gerichtet. Nettes Team. Gerne wieder.
knecht116View on Google: review by knecht116 (opens in a new tab)
Sehr kompetente Beratung ohne etwas verkaufen zu wollen! In Zukunft erste Anlaufstelle!
Wir haben im Januar einen Balkon mit Geländer und Treppe zum Garten erhalten und sind mit der Arbeit von "Die Schmiede" vollstens zufrieden. Die gesamte Abwicklung von Planung bis Montage hat problemlos geklappt. Wir können Herrn…
Daniela L.View on Google: review by Daniela L. (opens in a new tab)
Top Firma, zuverlässig, fair, preiswert, spitze Arbeit… immer wieder gerne!
Dieter H.View on Google: review by Dieter H. (opens in a new tab)
Wann immer ich Hilfe bei der Reparatur von Gartendekorationen aus Metall benötigte, wandte ich mich immer an die Schmiede. Warum? denn die Mitarbeiter sind sehr hilfsbereit und immer hilfsbereit bei Metallarbeiten. Hier sind Sie…
Super freundlich und die Schweißtische haben eine Top Qualität. Weiter so !
Michael M.View on Google: review by Michael M. (opens in a new tab)
Super höfliche Fachkräfte die tolle Arbeit geleistet haben in kurzer Zeit. Der Chef war vor Arbeitsbeginn persönlich vor Ort und jederzeit erreichbar! Qualität zu einem defitnitv fairen Preis. Top Firma! Wir sind mit unserem Zaun…
Damla K.View on Google: review by Damla K. (opens in a new tab)
Wir haben vor einem Jahr ein neues Balkongeländer von "Die Schmiede" erhalten. Alles war super, der Chef persönlich hat Maß genommen und nach nur 4 Wochen erfolgte direkt die Montage. Das alles zu einem Super Preis und man hat…
Philipp B.View on Google: review by Philipp B. (opens in a new tab)
Reviews are shown in their original language (German). This is a selection of the most recent Google reviews with 4 or 5 stars and a written comment (up to 12). Reviews have not been checked for authenticity.