Skip to content

All table lines

Welding tables with 28 mm holes: all lines and sizes

The welding tables from die schmiede come in four variants with the same 28 mm hole grid: Standard with a 15 mm plate, PRO as a heavy duty welding table with a 25 mm plate, stainless steel in 1.4301, and large and custom sizes. The table on this page shows which size is available in which line.

Request a quoteView sizes in the online shop (German)

Aluminium plate clamped on the grid of holes with several screw clamps, with upright angle stops behind it

Four table lines, one hole system

All welding tables from die schmiede have 28 mm bores in a 100 x 100 mm grid. They differ in plate thickness, material and size.

PRO welding table with a 25 mm plasma nitrided plate

PRO 25 mm

Plate in S355J2+N, plasma nitrided and surface ground. Sizes from 1000 x 1000 to 3000 x 1500 mm, also with diagonal holes.

PRO welding table
Standard welding table with a 15 mm plate and hole grid

Standard 15 mm

Plate in S355MC, plasma nitrided. Nine sizes from 1000 x 1000 to 2900 x 1400 mm.

Standard welding table
Large Standard welding table measuring 2900 x 1400 mm with hole grid

Large and custom sizes

Large tables up to 3000 x 1500 mm, an octagonal table for robot cells, larger dimensions made to order.

Large and custom sizes
Stainless steel welding table in 1.4301 with hole grid

Stainless steel 1.4301

15 mm stainless steel plate in 1200 x 800 and 2000 x 1000 mm, for workshops that process a lot of stainless steel.

Stainless steel welding table

Which sizes are available in which line

The shop lists 21 series sizes: nine each in Standard and PRO, two in stainless steel and the octagonal table. Seven of the PRO sizes are also available with diagonal holes.

Series sizes of die schmiede welding tables in the shop, as of November 2026
Size in mmStandard 15 mmPRO 25 mmPRO with diagonal holesStainless steel 15 mm
1000 x 1000yesyesyesno
1200 x 800yesyesyesyes
1200 x 1200yesyesyesno
1400 x 1400yesnonono
1500 x 1000yesyesyesno
1500 x 1500noyesnono
2000 x 1000yesyesyesyes
2000 x 1200noyesnono
2400 x 1200yesyesyesno
2900 x 1200yesnonono
2900 x 1400yesnonono
3000 x 1500noyesyesno
Octagonal table 1000 x 1000 x 200noyesnono

The weight of every size is given in the guide welding table size, dimensions and weight. Technical data for each line is on the pages PRO welding table 25 mm and Standard welding table 15 mm.

What all steel welding tables have in common

Standard and PRO tables share the same basic design: a drilled plate, drilled side walls and height-adjustable legs.

  • 28 mm bores in a 100 x 100 mm grid, in the table top and in the side walls
  • side walls 200 mm high
  • plasma nitrided surface
  • underside reinforced with 140 x 15 mm flat bar
  • legs in 80 x 80 x 6 mm structural hollow section, working height adjustable from approx. 865 to 965 mm
  • foot pads in RAL 9005 jet black
  • starter set included with most sizes

The accessories from die schmiede fit both lines. Accessory sets and quick-release clamping bolts each come in one version for 15 mm and one for 25 mm plate thickness, see accessories. Photos of the tables and set-ups are in the gallery.

In English, tables of this design are also called fixture tables or welding fixture tables. How these terms differ is explained in fixture table vs welding table.

Delivery and assembly

Every welding table is shipped compactly on a pallet by freight forwarder and delivered to the kerbside after an agreed appointment. You need a forklift on site for unloading.

You fit the legs yourself with the tools supplied and set the working height at the same time. If the table is to go to a country other than Germany, state the delivery country in your quote request.

Four steps to the right table

  1. Define the size

    Start from your typical assemblies. The table should hold your most common workpieces including stops. Occasional extra lengths can be handled with extension arms or U-angles.

  2. Choose the plate thickness

    According to the manufacturer, the 15 mm plate meets almost every requirement in a metal workshop. The 25 mm plate of the PRO line is also surface ground, harder and rated for a recommended total load of up to 4,000 kg.

  3. Decide on holes and material

    Check whether you need the PRO version with diagonal holes, or a table in 1.4301 for stainless steel work.

  4. Plan the accessories

    The starter set contains three parts. For set-ups with more clamping points there are accessory sets with 24 to 53 parts.

All criteria in context are explained in the buying guide.

Request a quote or view the shop

For delivery outside Germany, request a quote with the size, plate thickness and delivery country. The online shop lists every size with current prices and availability, some PRO tables also as a special offer with an accessory set. It is in German and delivers within Germany only.

Request a quote Online shop (German)

All welding tables at a glance

PRO welding table 25 mm

The PRO welding table has a 25 mm welding table top in S355J2+N, plasma nitrided and surface ground, …

Standard welding table 15 mm

The Standard steel welding table has a 15 mm plasma nitrided welding table top in micro-alloyed fine-grain steel …

Large and custom sizes

If you need a large welding table, the largest series size from die schmiede is the PRO table …

Frequently asked questions

In which sizes are die schmiede welding tables available?

In the shop, the Standard table comes in nine sizes from 1000 x 1000 to 2900 x 1400 mm and the PRO table in nine sizes from 1000 x 1000 to 3000 x 1500 mm. The stainless steel table is available in 1200 x 800 and 2000 x 1000 mm, the octagonal table in 1000 x 1000 x 200 mm. Other dimensions are made on request.

What is the difference between the Standard and PRO lines?

Standard has a 15 mm plate in S355MC, PRO a 25 mm plate in S355J2+N. Both are plasma nitrided and have 28 mm bores in a 100 x 100 mm grid. The PRO plate is also surface ground, has a surface hardness of approx. 850 HV, countersunk bores and a recommended total load of up to 4,000 kg. Diagonal holes are only available on PRO tables.

Do I have to assemble the welding table myself?

Yes, but only the legs. The table arrives compactly on a pallet, and the plate is already drilled and reinforced. You fit the legs with the tools supplied and set the working height between approx. 865 and 965 mm. You need a forklift to unload the table from the freight forwarder's lorry.

What our customers say

5.012 reviews on Google

All reviews on Google (opens in a new tab)

Reviews are shown in their original language (German). This is a selection of the most recent Google reviews with 4 or 5 stars and a written comment (up to 12). Reviews have not been checked for authenticity.