
Stops and clamping squares
Universal stops from 150 to 525 mm long, clamping squares up to 800 mm high, flat angles and an eccentric stop for aligning workpieces.
Stops and clamping squaresAccessories for System 28
Accessories from die schmiede fit directly into the 28 mm holes of the 100 mm grid: stops and squares align, screw clamps and clamping bolts hold, sets and extensions expand the table. Clamping bolts, the earth clamp and the sets come in versions for a 15 mm (Standard) or 25 mm (PRO) table top.

Welding table accessories for System 28 are clamping and stop elements that are inserted into the 28 mm holes in the table top and side walls and fixed there.
Because the holes sit in a 100 x 100 mm grid (hole spacing centre to centre), stops, squares and clamps can be positioned repeatably anywhere on the table. The visible grid shows whether an assembly is square as soon as you lay it down. The accessories from die schmiede fall into four main groups, each with its own page.

Universal stops from 150 to 525 mm long, clamping squares up to 800 mm high, flat angles and an eccentric stop for aligning workpieces.
Stops and clamping squares
Professional screw clamps 90° and 45° with spindle, quick-release clamping bolts for 15 and 25 mm table tops, magnetic and connecting bolts.
Clamps and clamping bolts
From the starter set with 3 parts to accessory set 4.0 with 53 parts, plus the mobile accessory trolley for storage.
Compare accessory sets
Construction bridges (U-angles) up to 3000 mm long, extension arms, a table leg, heavy duty castors and a transport bracket.
ExtensionsThe basic principle is simple: a quick-release clamping bolt connects a stop or square to the table top, and a screw clamp is pushed through a hole and presses the workpiece onto the table.
According to the shop, stops, squares and screw clamps fit tables with a 15 mm top as well as tables with a 25 mm top. For parts that pass through the plate, the thickness does matter: quick-release clamping bolts, the earth clamp and the accessory sets are each available for Standard tables with 15 mm and for PRO tables with 25 mm. Connecting bolts, magnetic clamping bolts and countersunk clamping bolts are designed for PRO tables.
A 28 mm hole in a 100 mm grid is a widely used industry standard. The accessories from die schmiede therefore generally also fit other tables built around the 28 mm hole system, as long as the clamping bolts match the plate thickness. Terms such as system hole, grid pitch and quick-release clamping bolt are explained in the glossary on fixture tables, clamp tables and 3D welding tables.
Besides the four main groups, the shop stocks smaller items for tubes, the earth connection, the torch and cleaning the holes.

Hold round and square tubes, in 50, 60 and 80 mm diameter.
Prism 60 in the shop
Provides the earth contact to the table and is fixed directly in a system hole.
Earth clamp in the shop
Matador 120 bench vice with an adapter plate for the hole grid.
Vice in the shop
Cleaner, anti-spatter lotion and a hole brush keep the top and the holes clean.
Care guide| Item | Use | Specifications | Art. no. |
|---|---|---|---|
| Prism 60 | Clamping round and square tubes | Ø 60 mm with screwed-in collar, milled at 90° | 28-4-0003 |
| Prism 80 | Clamping round and square tubes | Ø 80 mm with screwed-in collar, milled at 90° | 28-4-00010 |
| Vario prism 50 | Tubes with two support angles | Ø 50 mm with screwed-in collar, milled at 90° and 120° | 28-4-0004 |
| Earth clamp | Reliable contact to the welding table | Mounted in the system hole, versions for a 15 mm or 25 mm table top | 28-7-0002-15, 28-7-0002-25 |
| Torch holder | Holder for a welding torch or welding gun | Can be placed in any system hole, blackened | 28-7-0001 |
| Vice Matador 120 | Bench vice on the table | Peddinghaus Rigid, forged steel, jaw width 120 mm, clamping width 150 mm, clamping depth 80 mm, adapter plate 300 x 150 mm, 2 clamping bolts | 28-8-0001 |
| Welding table cleaner | Removing grease and dirt | 500 ml spray bottle, bio-based | 28-6-0003 |
| Anti-spatter lotion | Protection against weld spatter | 500 ml spray bottle, bio-based | 28-6-0001 |
| Hole brush Ø 30 mm | Cleaning 28 mm holes | With protective cap | 28-4053 |
Three parts are enough for your first jobs: a screw clamp, a quick-release clamping bolt and a clamping square. That is exactly what the starter set contains, and according to the product pages it is already included with many welding tables in the shop.
Screw clamps and quick-release clamping bolts hold the workpiece and the stops. Without them, every other accessory stays loose.
Universal stops set reference edges in the plane, clamping squares in height. Slots allow intermediate dimensions between two holes.
If you regularly build larger assemblies, add an accessory set, prisms for tubes and extensions such as construction bridges.
The comparison of accessory sets shows which set size suits the way you work.
Send your list of accessories and die schmiede will prepare a quote. The online shop shows every item with its current price and availability; it is in German and delivers within Germany only.

Welding table squares and stops set the reference edges on the table: universal stops in the plane, angle …

Welding table clamps press the workpiece onto the table, quick-release clamping bolts connect stops and squares to the …

Five welding table accessory sets are available from die schmiede for the System 28 hole grid: the starter …

With a welding table extension, the table grows with the job: construction bridges connect two tables or serve …
The shop names two kinds of accessories for the side walls: universal stops are expressly intended as stops for the side holes, and construction bridges (U-angles) are bolted to the side walls of the tables. Because the side walls are drilled like the table top, they also allow vertical set-ups. This means you can use the sides as clamping and stop surfaces in addition to the top.
Both: every part is available individually in the shop, alongside the starter set and accessory sets 1.0 to 4.0 with 24 to 53 parts. In its special offers, die schmiede also sells multipacks, for example sets of 10 professional 90° screw clamps, quick-release clamping bolts or universal stops, and a set of 5 professional 45° screw clamps.
A V-block, also called a prism, holds round and square tubes so that they stay in a defined position during tacking and welding. It is inserted into a system hole. die schmiede offers prisms with 60 and 80 mm diameter, milled at 90°, and the Vario prism 50 with supports at 90° and 120°. Accessory sets 3.0 and 4.0 contain two prisms with 60 mm diameter.
The earth clamp is fixed directly in a system hole of the table and so creates a reliable contact between the welding machine and the table. According to the shop, this makes mounting quick and easy. It comes in two versions, for Standard tables with a 15 mm top and for PRO tables with a 25 mm top. Choose the version in the shop that matches your table.
5.012 reviews on Google
Ich kam mit einem kleinen außergewöhnlichen Anliegen und freue mich über so viel spontane Hilfe, Freundlichkeit und Professionalität, DANKE!
Tanja B.View on Google: review by Tanja B. (opens in a new tab)
Nicht mehr daran geglaubt - aber es gibt sie noch ! Deutsche Wertarbeit !! Rechtzeitig zum Frühlingsanfang konnten wir unsere "Wasserdichte Balkonanlage" mit Außentreppe einweihen und sind vollends begeistert von der…
Hubert L.View on Google: review by Hubert L. (opens in a new tab)
Eine Super-Schmiede, die auch Außergewöhnliche Produkte kreieren kann. Meine Kreuz, die ich zur Entstörung von Elektrosmog wurden auf Millimeter genaue Einstellung geschmiedet. Das war eine Klasseleistung! Jetzt kann ich wieder…
GoggoschelleView on Google: review by Goggoschelle (opens in a new tab)
Unsere verbogene Garagentorstange wurde sehr kurzfristig gerade gerichtet. Nettes Team. Gerne wieder.
knecht116View on Google: review by knecht116 (opens in a new tab)
Sehr kompetente Beratung ohne etwas verkaufen zu wollen! In Zukunft erste Anlaufstelle!
Wir haben im Januar einen Balkon mit Geländer und Treppe zum Garten erhalten und sind mit der Arbeit von "Die Schmiede" vollstens zufrieden. Die gesamte Abwicklung von Planung bis Montage hat problemlos geklappt. Wir können Herrn…
Daniela L.View on Google: review by Daniela L. (opens in a new tab)
Top Firma, zuverlässig, fair, preiswert, spitze Arbeit… immer wieder gerne!
Dieter H.View on Google: review by Dieter H. (opens in a new tab)
Wann immer ich Hilfe bei der Reparatur von Gartendekorationen aus Metall benötigte, wandte ich mich immer an die Schmiede. Warum? denn die Mitarbeiter sind sehr hilfsbereit und immer hilfsbereit bei Metallarbeiten. Hier sind Sie…
Super freundlich und die Schweißtische haben eine Top Qualität. Weiter so !
Michael M.View on Google: review by Michael M. (opens in a new tab)
Super höfliche Fachkräfte die tolle Arbeit geleistet haben in kurzer Zeit. Der Chef war vor Arbeitsbeginn persönlich vor Ort und jederzeit erreichbar! Qualität zu einem defitnitv fairen Preis. Top Firma! Wir sind mit unserem Zaun…
Damla K.View on Google: review by Damla K. (opens in a new tab)
Wir haben vor einem Jahr ein neues Balkongeländer von "Die Schmiede" erhalten. Alles war super, der Chef persönlich hat Maß genommen und nach nur 4 Wochen erfolgte direkt die Montage. Das alles zu einem Super Preis und man hat…
Philipp B.View on Google: review by Philipp B. (opens in a new tab)
Reviews are shown in their original language (German). This is a selection of the most recent Google reviews with 4 or 5 stars and a written comment (up to 12). Reviews have not been checked for authenticity.