Skip to content

Know-how for the workshop

Welding table guide

This welding table guide answers practical questions about welding tables with a hole grid: buying, hole systems, surface treatment, size, care and DIY builds. It is published by die schmiede GmbH in Marktsteft, Germany, a manufacturer of System 28 welding tables.

Read the buying guideOnline shop (German)

PRO welding tables with a grid of holes, set up as a fixture from angles, screw clamps and aluminium profiles

What this welding table guide covers

The guide answers the questions that metal fabricators, workshops and ambitious hobby welders ask before and after buying a welding table: which size, which hole system, which surface, and how the table stays accurate for years.

die schmiede GmbH in 97342 Marktsteft, Germany, is a metal fabrication business that manufactures System 28 welding tables and builds railings, gates and stairs itself. Technical data on its own tables comes from the die schmiede online shop. General know-how is worded as such and applies to tables from other manufacturers as well.

Every article starts with a short answer of a few sentences. The details follow with tables, checklists and step-by-step instructions, and frequently asked questions at the end cover typical individual cases. That way you find the answer quickly, and the reasoning behind it when you need it.

All articles in the guide

Seven articles cover the key questions about welding tables, from choosing one to looking after it.

Rectangular metal frame fixed on a welding table with screw clamps, stops and clamping squares

Buying a welding table: the checklist

Ten points that matter before you buy: plate thickness, format, hole system, surface, weight, working height, accessories, expandability, delivery and service. With questions you should ask any manufacturer.

Read the buying guide
Close-up of a hole grid with 28 mm holes, engraved grid lines and a millimetre scale

System 16 or System 28

Hole diameter, grid, plate thickness, clamping force and accessory weight compared. Plus which accessories fit where, and a decision guide for your workshop.

Compare the systems
Plasma nitrided PRO welding table 2400 x 1200 mm with holes in the top and side walls

Plasma nitriding explained

How plasma nitriding works, what it does for hardness, wear, rust and weld spatter, why nitrided tables show colour differences and how they compare with stainless steel.

Read about plasma nitriding
Large Standard welding table 2900 x 1400 mm with hole grid, plasma nitrided

Size and plate thickness

Choosing the format by workpiece, the weight of every table from approx. 215 to 1,517 kg, 15 or 25 mm plate thickness, load capacity, working height and joining two tables.

Read the size guide
Hole brush with 30 mm diameter and protective cap for cleaning 28 mm holes

Care and cleaning

Cleaning after work, removing weld spatter gently, using anti-spatter spray correctly, preventing flash rust and keeping the holes clean. With a list of typical mistakes.

Read the care guide
Aluminium profiles clamped in a fixture of clamping squares and screw clamps on a PRO welding table

Build or buy

What makes a DIY welding table with a hole grid demanding: flatness, distortion, hole pattern, material and accessories. With practical tips and a middle way between buying and building.

Weigh up build or buy
PRO welding table top with diagonally offset 28 mm holes and engraved grid lines

Fixture table, clamp table, 3D welding table

The glossary: fixture table, welding jig table, clamp table, modular and 3D welding table defined and compared, plus system holes, grid pitch, side walls and clamping tools.

Open the glossary

Where should you start?

Which article helps first depends on where you are right now.

  1. You are planning a purchase

    Start with the buying guide, then settle the hole system and the right size.

  2. You are comparing surfaces

    Read what plasma nitriding does and when a stainless steel welding table makes sense.

  3. You are comparing product names

    Fixture table, clamp table and modular welding table are often used for the same product. The glossary sorts out what each term means.

  4. Your table is already in place

    The guide to care and cleaning helps you keep the top flat and the holes clean for years.

  5. You are thinking about building one

    Build or buy shows where a DIY welding table reaches its limits and which middle way is possible.

Welding tables from die schmiede in figures

These values apply to the welding tables made by die schmiede and come from the online shop, as of 19 November 2026. In the articles they are marked as manufacturer data.

Key figures of die schmiede GmbH welding tables
FeatureValue
Hole systemSystem 28, 28 mm holes
Grid100 x 100 mm, centre to centre
Plate thickness15 mm (Standard) and 25 mm (PRO)
Formats1000 x 1000 to 3000 x 1500 mm, larger sizes on request
Working heightapprox. 865 to 965 mm (Standard and PRO), stainless steel approx. 880 to 980 mm
Surface of the steel tablesplasma nitrided, PRO additionally surface ground
Side walls200 mm high, drilled

All models are listed under Welding tables, clamping tools and extensions under Accessories.

More answers

All guides at a glance

Buying a welding table

When buying a welding table, plate thickness, format and hole system matter most, followed by surface, weight, working …

System 16 or System 28

A 28 mm or 16 mm welding table differs in the diameter of its holes and therefore in …

Plasma nitriding explained

A plasma nitrided welding table has a hardened surface layer that reduces wear, rust and sticking weld spatter. …

Size and plate thickness

The right welding table size follows from your typical workpiece plus room for clamping tools, and the right …

Care and cleaning

A welding table stays accurate when its top and holes are clean and dry. Here you can read …

Build or buy

A simple DIY welding table is well within reach for an experienced welder, while an accurate fixture table …

Frequently asked questions

Why does the guide not list prices?

The guide explains technology and selection criteria that stay valid for years, whereas prices change with material costs, promotions and the product range. To keep outdated figures out of circulation, current prices are shown only in the die schmiede online shop, which is in German. If you need a figure for a specific project, request a quote via the contact page.

Does the advice apply to welding tables from other manufacturers?

Yes, the general advice on selection, hole systems, surfaces, care and DIY builds applies to fixture tables from any manufacturer. Figures such as weights, formats, working heights or hardness values, on the other hand, refer explicitly to die schmiede tables and are marked as such in the text. For tables from other manufacturers, check their own specifications.

How up to date is the technical data in the guide?

The technical data on die schmiede tables reflects the online shop as of 19 November 2026, and every article shows its update date. If the shop data changes later, the shop takes precedence, because that is where die schmiede maintains its product range and product data on an ongoing basis.

What our customers say

5.012 reviews on Google

All reviews on Google (opens in a new tab)

Reviews are shown in their original language (German). This is a selection of the most recent Google reviews with 4 or 5 stars and a written comment (up to 12). Reviews have not been checked for authenticity.