Skip to content

Accessories: extending

Welding table extensions and construction bridges

With a welding table extension, the table grows with the job: construction bridges connect two tables or serve as a vertical set-up, and extension arms lengthen the work surface by 500 or 1000 mm. A table leg, heavy duty castors and a transport bracket provide a secure stand and mobility.

Request a quoteView extensions in the online shop (German)

PRO construction bridge as a U-angle 1500 x 200 x 200 mm, plasma nitrided, with holes on all sides

In short: The shop calls a construction bridge a U-angle (Winkel U-Form): a U-profile 200 mm wide and 200 mm high with 28 mm holes in the top and side walls. It comes nitrided from 500 to 1600 mm and as a PRO version with 25 mm material thickness from 500 to 3000 mm long.

Construction bridges as U-angles

A construction bridge connects two welding tables into one large work surface or serves on the table as a vertical construction and clamping aid.

According to the shop, it is bolted to the side walls of the welding tables. As the top and the side walls are drilled, the same stops and clamps can be used on the bridge as on the table. In the shop, die schmiede lists the construction bridges in two lines under the name Winkel U-Form (U-angle).

U-angle as a construction bridge with holes in the top and side walls
U-angle with 200 mm side wall height

U-angle, nitrided

The nitrided version is made of micro-alloyed fine-grain steel S355MC. It is supplied with a fixing set of 4 screws M27 x 60 and 4 galvanised nuts M27, plus 8 washers for the 500, 1000 and 1200 mm lengths.

U-angle, nitrided (dimensions and weights from the product description)
ModelLength x width x heightWeightArt. no.
U-angle 500500 x 200 x 200 mm35 kg28-K500
U-angle 10001000 x 200 x 200 mm70 kg28-K1000
U-angle 12001200 x 200 x 200 mm84 kg28-K1200
U-angle 16001600 x 200 x 200 mm110 kg28-K1600

U-angle PRO, plasma nitrided

The PRO version for PRO welding tables is made of S355J2+N steel with 25 mm material thickness, plasma nitrided and surface ground, with holes of 28 mm diameter. It serves as a table extension and for vertical set-ups. It is connected to the table with connecting bolts (art. no. 28-4-0011-25).

U-angle PRO, 200 x 200 mm, material thickness 25 mm (data from the shop)
ModelLengthWeightArt. no.
U-angle PRO 500500 mm67 kg28-K500-25
U-angle PRO 10001000 mm120 kg28-K1000-25
U-angle PRO 15001500 mm172 kg28-K1500-25
U-angle PRO 20002000 mm225 kg28-K2000-25
U-angle PRO 30003000 mm331 kg28-K3000-25

Connecting two welding tables

Two tables become one work surface via a construction bridge if height, bridge and support are right.

  1. Align the tables

    Set both tables to the same working height; the table feet are height-adjustable.

  2. Position the bridge

    Place the construction bridge against the side walls of the tables.

  3. Bolt it on

    Bolt nitrided bridges with the supplied M27 fixing set, and PRO bridges with connecting bolts.

  4. Support it

    From a bridge length of 1000 mm, place a table leg underneath.

If you need a large area permanently, you can choose a large format instead of two connected tables; large formats and custom sizes are shown on the page large and custom sizes.

Extension arms: welding table extension by 500 or 1000 mm

An extension arm lengthens the work surface by 500 or 1000 mm at a width of 200 mm.

Both extension arms have a grid with holes on the top, are reinforced on the underside with 100 x 15 mm flat bar and are nitrided. They are fixed with 2 screws M27 x 60 and 2 galvanised nuts M27. According to die schmiede, the extension arm can also be used as a vertical construction aid on the table. A video on the videos page shows what this looks like.

Extension arm lengthening the work surface of the welding table
Extension arm with holes on the top
Extension arms for welding tables (data from the shop)
ModelExtensionWeight according to shop dataArt. no.
Extension arm 500500 x 200 mm21 kg28-5-0001-15
Extension arm 10001000 x 200 mm37 kg28-5-0002-15

Table leg, castors, transport bracket and corner connection

These extensions make sure that table and bridges stand securely, can be moved or can be extended around a corner.

According to the shop, the heavy duty castors carry 700 kg each and can be levelled for uneven workshop floors. The table leg supports construction bridges and welding tables, and the transport bracket is intended for moving welding tables safely.

Welding table with a grid of holes, fitted with heavy duty castors on all four feet
Heavy duty castors, hot-dip galvanised and levelling
Further extensions (data from the shop)
ItemUseDataArt. no.
Table legSupport for construction bridges and welding tablesStructural hollow section 80 x 80 x 6 mm, height-adjustable for working heights of approx. 860 to 980 mm, floor pad Ø 110 mm28-1-0015
4x heavy duty castorMaking the table mobile700 kg load capacity per castor, wheel Ø 150 mm, wheel width 42 mm, height-adjustable 870 to 940 mm, hot-dip galvanised, 15 kg28-7-0004
Transport bracketMoving welding tables safely2,500 kg load capacity, nitrided28-8-0004-25
Large corner connectionDiagonal table extension at 45°Cast GGG40, nitrided, 200 x 200 x 170 mm, 15.7 kg28-8-0003-25

The large cast PRO clamping squares are also suitable as table extensions; they are listed on the page stops and clamping squares.

Extensions: quote or online shop

Construction bridges, extension arms, castors and table legs are listed with current price and availability in the online shop, which is in German and delivers within Germany only. Request custom lengths and orders from outside Germany directly from die schmiede.

Request a quote Extensions in the shop (German)

Frequently asked questions

What is a construction bridge for a welding table?

A construction bridge is a U-shaped steel profile with holes in the top and side walls that connects two welding tables or serves on the table as a vertical construction and clamping aid. At die schmiede it is called a U-angle (Winkel U-Form), is 200 mm wide and 200 mm high and is bolted to the side walls of the tables. It is available nitrided up to 1600 mm and as a PRO version up to 3000 mm.

When does a construction bridge need a table leg?

According to the shop, from a length of 1000 mm: support from a table leg is then required. The table leg from die schmiede is made of 80 x 80 x 6 mm structural hollow section, can be adjusted for working heights of approx. 860 to 980 mm and has a floor pad with 110 mm diameter. It is available separately under art. no. 28-1-0015.

How much weight do the heavy duty castors carry?

Each heavy duty castor carries 700 kg according to the shop, and they are supplied as a set of 4. The castors have a 150 mm wheel diameter, are hot-dip galvanised, can be levelled for uneven workshop floors and are height-adjustable from 870 to 940 mm. Before ordering, check the total weight of table, accessories and workpieces.

Are construction bridges available in custom lengths?

Standard lengths are listed in the shop, and custom lengths can be requested from die schmiede. The nitrided U-angle comes in 500, 1000, 1200 and 1600 mm, the PRO version in 500, 1000, 1500, 2000 and 3000 mm. Lengths between 1000 and 2900 mm have previously been offered on request. For a custom length, send your required dimensions via the contact form or by email.

What is the large corner connection used for?

The large corner connection extends a welding table diagonally at an angle of 45°. It is cast from GGG40, nitrided, measures 200 x 200 x 170 mm and weighs 15.7 kg. You will find it under art. no. 28-8-0003-25 in the extensions collection of the online shop.

What our customers say

5.012 reviews on Google

All reviews on Google (opens in a new tab)

Reviews are shown in their original language (German). This is a selection of the most recent Google reviews with 4 or 5 stars and a written comment (up to 12). Reviews have not been checked for authenticity.